Periodic Infrared Inspection Best Practices - Route Based Surveys

Introduction

Beginning in the late 1960's, thermal imaging was limited to power line and substation inspection of overheating electrical connections. Those systems were bulky vehicle-mounted systems that cost perhaps as much as $500,000 in today's dollars. While these systems offered for the first time an easy and intuitive method of identifying connection problems, these systems could not measure temperature or digitally record images for later analysis and reporting. The worldwide market in 1970 for infrared cameras was less than 50 units. Today the market for infrared cameras used for maintenance inspections is projected to exceed 18,000 cameras. Thermography along with vibration monitoring, oil analysis, laser sighting-based rotating machinery shaft alignment and ultrasonic testing have become the toolset used by maintenance departments at an ever increasing number of capital intensive facilities.

By adopting a route-based thermography approach along with an in-camera database and intuitive data logger PdM users can save time, get more consistent results and dramatically improve their thermography program return on investment (ROI).

Today's operations manager is under tremendous pressure to increase asset availability, decrease costs, deal with employee skill levels and turn over, safety regulations, ISO quality compliance and an ever increasing competitive environment. A new class of thermography data collectors is now available designed to create and follow user-created routes, capture in-the-field incident details and automate report generation and run database synchronization. By adopting a route-based thermography approach along with an in-camera database and intuitive data logger, PdM users can save time, get more consistent results and dramatically improve their thermography program return on investment (ROI).

CMMS Isn't Route-based Maintenance

The dilemma is that the CMMS provider does not think in terms of route-based activities at all. Their systems are driven by work orders. If each inspection is given a work order number, you can do the inspections in a route documented with more than 250 work orders. First of all, this is impractical for the person doing the inspections, and secondly, it will require a lot of time for someone to close all the work orders. Another way route-based activities are performed in a work order-driven CMMS is to give each route a work order number and describe each inspection in a sub-work order. This still creates complications and administrative time. A third example of how some plants try to document and administer route-based activities is to give each route a work order number and have the route documented in a spreadsheet. Again, the dilemma is that this method will not support effective routes and will make it more cumbersome than necessary to change the content of inspections, transfer tasks to operators, change frequencies, merge mechanical and electrical inspections, and so forth. All of these activities are frequently done if you have a good system implemented. The solution is, therefore, to have a standalone system for route-based activities. Even in a time when it seems like all activities must be integrated into one company-wide system that covers everything, the best solutions can still be standalone systems. There are very few things-if any at all-in a route-based system that need to be tied with other activities. Therefore, you can very well buy a standalone system for this activity. A single-user system that can do this well is not expensive.

Pen-based Computers Simplify Field Data Collection

Pen tablet computers allow the technician to collect infrared inspection data, perform temperature analysis, diagnose the problem, evaluate their urgency, suggest corrective actions and capture a visible reference image. Powerful handheld, pen-based computers are now integrated into infrared cameras that provide a field technician performing on-site inspection and maintenance all the computer power needed to do the job swiftly and efficiently-whether it is integrating their operations with the computerized maintenance management system or testing, diagnosing, and repairing equipment on the spot.

The pen tablet is the most widely used device to be deployed in field applications because of the versatility of its interface, its touch screen for data input and significant memory capability.

Handheld Pen Computers

For industry and the military, the problems with using laptops in the plant or the field are being solved by handheld pen-based computers-a pen tablet or a personal digital assistant (PDA). To date, the pen tablet-almost as powerful as a laptop but smaller and lighter-has become the most widely used device to be deployed in field applications because of the versatility of its interface, its touchscreen for data input and significant memory capability. The HotShot HD infrared camera by Electrophysics incorporates a tablet PC processor running on the Microsoft Windows CE operating system. The touchscreen features direct-function icons large enough for finger actuation and additional data-type features like file naming using a stylus. More reliable data is obtained. Error-prone, handwritten records are replaced by reliable data, automatically gathered, stored, and consistently available throughout the enterprise. Record keeping costs are reduced. Less paperwork lowers administrative overhead because data is processed more efficiently and disseminated widely without producing redundant copies-or even any printed record at all. Decision making is faster and more cost-effective. By integrating real-time field reports with the computerized maintenance management system (CMMS), managers at all levels share complete, up-to-the-minute information, and can react quickly to changing field conditions or emergencies. Condition monitoring tests involving a number of parameters-vibration, heat, oil quality, pressure-can be compared quickly to confirm impending problems before they become catastrophic.

Data Collection

Maintenance starts with knowing what is going on-how equipment is operating, what increased stresses are being applied, how conditions have changed. Data must be collected, either by a remote monitoring system or by workers on-site. In the latter case, the handheld computer makes data collection faster, more accurate, and more flexible.

Route-based Infrared Inspection

Many PdM technicians are familiar with, or are users of, route-based vibration data collectors. Many of today's vibration instrument vendors provide software tools on both a PC platform and their portable vibration data collectors to organize and create route instructions that are uploaded into portable systems that assist the user through a series of inspection points. For example, Electrophysics' HotShot HD is the first infrared camera of its kind to integrate route logic and all the necessary interfaces to create routes and capture all the inspection details within its pen-based computer with in-camera data logger. The camera features two route programming modes.

Mode 1: Learn a Route

At most facilities it is advantageous to create a route file by simply walking along and entering each point according to the natural flow of how equipment is laid out and to optimize any support labor or the need to comply with safety regulations such as personnel protective equipment (PPE) policies. At each point the operator captures a reference image and enters location and equipment detail. At the conclusion of the walk/learn route creation the route log file is uploaded into the PC database application for editing and to add any additional information desired.

Mode 2: Create Route File in PC and Upload to Camera

In this mode the user populates the thermography asset database with data exported from a CMMS system or with new data records and creates a route by selecting files in order of intended inspection sequence. A route log file will be created and once uploaded to the camera will pull all relevant data sets into the camera. On-screen prompts will direct the user from point to point. An additional feature enables the user to add a point not on the current route and then synchronize the updated route log file if the new inspection point is intended to be included on a recurring basis.

Route Prompts Guide Data Collection

Once a route is created and uploaded to the camera, the camera presents prompts to help guide the user from point to point. It is possible to add descriptive information that gives the inspection some level of instruction about the point.

Return on Investment

In order to fully appreciate the impact of a comprehensive software suite (asset database, route management and report generation) we have constructed an analysis of costs of a thermography program and the potential improvements that can be realized with highly integrated in camera and PC host software. For this analysis we will make the following assumptions:

1. The cost of camera and software is $20,000¹
2. The burdened hourly salary of an infrared technician is $60 an hour or about $125,000 per year.
3. The technician uses the infrared camera 50% of the hours worked.
4. The thermography program documents 20 incidents per week or about 1000 per year.
5. The camera is a capitalized asset and is depreciated over 5 years

Yearly savings of nearly $14,000 can be realized

The ROI on productivity tools is very high since they are integrated into systems available for less than $20,000.

1 - The monthly costs for the camera, based on a 5-year or 60-month depreciation schedule, are about $350 per month. The costs for the infrared camera operator will be $1200 per week or $62,400 per year.

Conclusions

The largest cost in a thermography inspection program is the camera operator/technician. By focusing on incorporating advanced features including route management and in camera data logging operators can dramatically improve their programs efficiency and cost while improving work quality and ease operator training demands. Ongoing developments to integrate infrared inspection data into CMMS and asset performance software systems will result in the next step in convergence on the plant floor and continue the development of new and innovative solutions designed to improve overall facility operation and capital equipment availability.

Please visit us at http://www.electrophysics.com/rirez

For more comprehensive White Papers visit our online Knowledge Center http://www.electrophysics.com/thermal-imaging

Electrophysics - IR Cameras for Thermography Professionals 373 Route 46, Fairfield, NJ 07004 Phone: 973-882-0211 Fax: 973-882-0997

Canon XSi Review
Buy Blue Ray Movie
Buy Canon Rebel XSi Price